Review Our Business

Rebuilding And Restoring Chimney Crowns

When water gets into the chimney of a home, it causes all sorts of damage and decay to the entire system. Unfortunately, much of the damage is usually done before the homeowner is even made aware of the problem. There are many ways to prevent water damage to your chimney, but one of the most important things you can do is make sure you have a well-constructed, well-maintained crown.

The crown of the chimney is a concrete or mortar layer that seals the top of the chimney. Unfortunately, many crowns are inadequately sealed, too thin, water-damaged, or improperly sized and designed.

  • Inadequately sealed crowns can have openings where water can penetrate the chimney system and wreak havoc.
  • Many crowns are not built to the proper thickness which can cause them to deteriorate rapidly. A good, solid crown should be 2 + inches thick (at its thinnest point). Anything less will be weather-worn and leaky in no time.
  • Rain and snow can cause cracking and crumbling of the chimney crown and open up holes and gaps for water to penetrate. This is especially common in a crown that is poorly designed or too thin.
  • If a crown is too small for the chimney on which it sits, it can leave spaces for water to settle or access the chimney system. A well-designed crown should not only fit the chimney top, it should extend past it. This design encourages water to travel away from the masonry of the chimney and run off of the roof.
  • It should also have an overhang that is at least 2 inches on each side of the chimney and a built in drip edge. This will ensure that water is shed away from the chimney and not directed down into the masonry.
  • There should be enough space between the flue tile and the brick of the chimney to allow for the tile to expand both upward and outward. This will keep help prevent the crown from cracking when the flue tiles expand. Some masons will wrap the flue liner with tar paper, but this actually doesn’t allow for expansion and should not be used.
  • A quality water repellent should be added to the crown mix for optimal water protection.
  • The crown should be sloped down on all sides and finished smooth to maximize water runoff and extend the life of the chimney. Remember, the drier your chimney, the better!
  • The edges of the crown should be angled, which will add strength to the crown and prevent chipping.

Unfortunately, sloppy crown work is all too common. Your chimney may already be suffering the effects of a poorly-constructed crown, and may be well on its way to needing extensive restoration work. To protect yourself from costly repairs and for your own peace of mind, it’s vital that you have the quality, condition, and construction of your crown professionally evaluated immediately.

crowndiagram

 

Floating crowns include:  

  • Removal and disposal of the pre-existing splash.
  • Installation of a bond break & Expansion gap underneath the new crown and around the flue tile.  This will allow the new crown & flue tile to expand and contract freely, minimizing any cracks long term in your new crown.
  • Built with a two inch overhang past the chimney to shed water off the chimney to protect the underlying brick from long term water damage
  • Drip edge is installed underneath the overhanging edge to ensure that water does not run back onto the chimney.
  • 3 1/2″ inches of concrete is poured to ensure maximum strength.
  • Made from a special blend of crack resistant concrete to ensure a long lasting life.
  • Sloped with an application of a water repellent to maximize water run off and lifespan
  • 10 Year Warranty against cracks larger 1/16″
  • Brings the chimney up to current codes & Standards.  2015 edition International Residential Code (IRC) section R1003.9.1 & 2016 edition of NFPA 211 Standards for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances section 7.2.13.4.

rusted chimney cap and deteriorated chimney crown

Before

new chimney cap and rebuilt chimney crown

After

At Magic Broom, we are crown rebuild experts, and we guarantee all of our work. We don’t just want your chimney protected, we want it looking beautiful. That’s why we put so much effort into providing our technicians with the best in education, techniques, and tools. The difference between a well-designed and properly-crafted crown and an ordinary crown can be 80 years – so it’s definitely worth investing in a professional crown job. When having your crown rebuilt by a Magic Broom technician, you can expect high-quality precision and a leak-proof, durable and beautiful crown job. We guarantee it!

To schedule an appointment to have your chimney crown inspected or rebuilt, please click here.

 

If there are problems with your firebox, Magic Broom can perform a thorough inspection as well as any necessary repairs to this portion of your fireplace system. You can rely on Magic Broom for quality service and performance.







We Accept Credit Cards





Certifications & Associations

NCSG Member NFI

Review Our Services

Magic Broom Chimney Sweeps in Waldorf MD on Google Magic Broom Chimney Sweeps in Waldorf MD on Angie's List Yelp Review - Southern MD - Magic Broom Chimney Sweeps

Follow Us